Certificates

A third-party verified environmental declaration for a product or product family under a programme operator and product category rule.

A lifecycle assessment or supporting study exists for the product, product family, or declared scope.

A quantified cradle-to-gate or cradle-to-grave greenhouse-gas figure for the product, ideally to ISO 14067.

The product's measured footprint has been addressed under a stated carbon-neutrality protocol — now ISO 14068-1:2023, which requires a reduce-remove-offset hierarchy rather than offsetting alone.

A certificate or test-method statement indicates low chemical emissions under a named indoor-air-quality programme or method.

Third-party chamber testing showing the product meets VOC emission limits; Gold applies stricter limits suitable for schools and healthcare.

Third-party certification of indoor air quality emissions for furniture and building materials; Gold meets CDPH 01350 and BIFMA limits.

The product meets Finland's M1 class limits for VOC and odour emissions — the strictest tier of the Nordic emission classification.

Low-VOC indoor-air-quality emissions certification for carpet, cushion, and adhesives, tested against stricter emission thresholds than the base Green Label programme.

A structured material ingredient disclosure under the HPD Open Standard and stated disclosure threshold.

A Declare programme status such as Red List Free, Red List Approved, or Declared under ILFI programme rules.

A bounded claim that a named chemical or chemical family is not intentionally present or not detected under a stated scope.

A standalone certificate covering only the material health category of Cradle to Cradle — chemical ingredients assessed against hazard criteria.

Every component of the textile article has been tested against a harmful-substances list, with limits stricter than most legal requirements.

A declared manufacturing or origin statement for a product, component, or product family.

A forestry certification or chain-of-custody document supports responsible wood sourcing for a declared product scope.

The textile contains a verified minimum of organic fibre (70% for 'made with organic', 95% for 'organic') with environmental and social criteria applied through processing.

Chain-of-custody certification for bio-based or circular feedstocks, usually via mass balance allocation rather than physical segregation.

A composition disclosure states product content percentages, recycled-content type, calculation basis, and product scope.

Third-party verification of recycled content (minimum 20%, 50%+ for the GRS label) with chain of custody plus social and chemical criteria.

Chain-of-custody verification that claimed recycled material is genuinely present (5% minimum) — content tracking only.

The manufacturer operates a programme to reclaim the product at end of life, under published terms.

Third-party certification across five categories — material health, circularity, clean air & climate protection, water & soil stewardship, and social fairness — at an overall level (Bronze to Platinum).

Certification that a product meets ILFI's regenerative product standard, including Red List avoidance and handprinting (giving back more than the product takes).

Germany's national Type I ecolabel: the product meets published multi-criteria environmental requirements for its category, verified by an independent body.

The EU's official Type I ecolabel: independently verified compliance with multi-criteria environmental standards for the product group.

The official Nordic Type I ecolabel: independently verified multi-criteria environmental performance, generally strict on chemicals.

US-based Type I ecolabel certification against published standards (e.g. GS-11 for paints), covering health and environmental criteria.

Type I ecolabel certification to a UL environmental standard covering multiple lifecycle criteria for the product category.

Furniture-industry sustainability certification against ANSI/BIFMA e3, scored 1–3 across materials, energy, health, and social responsibility.

Sustainability assessment certification for carpet (Silver/Gold/Platinum) covering lifecycle criteria including recycled content and end-of-life management.

Sustainability assessment certification for resilient flooring (vinyl, linoleum, rubber) across lifecycle criteria.

Multi-attribute sustainability assessment certification for commercial furnishings fabric (Compliant / Silver / Gold / Platinum) across lifecycle criteria including fibre sourcing, manufacturing, and end-of-life management.

Multi-attribute sustainability assessment certification for commercial wallcovering across lifecycle criteria, parallel to the NSF 140 / 332 / 336 family.

Multi-attribute sustainability certification for ceramic tile and tile installation materials (ANSI A138.1) covering product characteristics, manufacturing, end-of-life management, and progressive/innovation credits.

A public manufacturer policy, plan, target, or commitment relevant to sustainability governance or progress.

The manufacturer operates an audited environmental management system at the certified site(s) under ISO 14001.

A transparency disclosure of the organisation's social-equity performance — diversity, worker benefits, local sourcing — scored across indicators.

The company met B Lab's threshold score for overall social and environmental performance, with legal accountability commitments.

The production site passed a labour-standards audit (e.g. SA8000 certification or a SMETA audit) covering working conditions.

The manufacturer has performed due diligence on tin, tantalum, tungsten, and gold (3TG) sourcing, documented via the standard reporting template.

A bounded compliance statement for a named regulation, jurisdiction, product scope, and version.

A hint that source support may be relevant to a rating-system pathway, subject to project context and rule version.

An expert or programme classification groups source-backed claims into sustainability impact areas for discovery, review, or reporting.